Summary
Using a bit designed to penetrate cement or terra-cotta, drill a hole just large enough to thread the plug of the pump's electric cord through the bottom of the container. Tape the cord into place with duct tape, leaving enough of the cord inside the container to allow the pump to be elevated several inches above the bottom. Fill the hole with silicone sealant, and set the container on pot feet or bricks (to make room for the cord to come out underneath). Allow the silicone to dry for a full 24 hours....
See the full content of this document
Extract
Just Add Water
THE MOST SOOTHING SOUNDS in the world come from a mountain stream. Something about the rush of water as it tumbles over rocks and...
See the full content of this document