Deregulation (Weights and Measures) Order 1999

JurisdictionUK Non-devolved
CitationSI 1999/503

1999 No. 503

DEREGULATION

The Deregulation (Weights and Measures) Order 1999

Made 1st March 1999

Coming into force in accordance with article 1

Whereas:

(a) the Secretary of State is of the opinion that certain provisions of the Weights and Measures Act 19851which are the subject of this Order authorise the imposition of burdens affecting persons in the carrying on of a trade, business, profession or otherwise and that by amending or repealing the provisions concerned and by making certain other provision it is possible to remove or reduce the burdens without removing any necessary protection;

(b) he has consulted such organisations as appear to him to be representative of interests substantially affected by his proposals and such other persons as he considers appropriate;

(c) it appears to the Secretary of State that it is appropriate, following that consultation, to proceed with the making of this Order;

(d) a document setting out the Secretary of State’s proposals has been laid before Parliament as required by section 3 of the Deregulation and Contracting Out Act 19942and the period for Parliamentary consideration under section 4 of that Act has expired;

(e) the Secretary of State has had regard to the representations made during that period and, in particular, to any resolution or report of, or of any committee of, either House of Parliament with regard to the document;

(f) a draft of this Order has been laid before Parliament together with a statement giving details of the representations and any such resolution or report and the changes which the Secretary of State has made to his proposals in the light of such representations, resolution or report; and

(g) a draft of this Order has been approved by a resolution of each House of Parliament;

Now, therefore, the Secretary of State, in exercise of the powers conferred on him by section 1 of the Deregulation and Contracting Out Act 1994, hereby makes the following Order:–

S-1 Citation, interpretation and commencement

Citation, interpretation and commencement

1.—(1) This Order may be cited as the Deregulation (Weights and Measures) Order 1999.

(2) In this Order “the 1985 Act” means the Weights and Measures Act 19853.

(3) This Order shall come into force 28 days after the day on which it is made.

S-2 Verification by approved verifiers

Verification by approved verifiers

2.—(1) In subsection (2)(a) of section 11 of the 1985 Act (certain equipment to be passed and stamped by an inspector), after the word “inspector” there shall be inserted the words “or approved verifier”.

(2) In subsection (4) of that section, after the word “passed”, in the first place where it occurs, there shall be inserted the words “by an inspector” and for the words “an inspector” there shall be substituted the words “the inspector”.

(3) After that subsection there shall be inserted the following subsection–

S-4A

“4A An approved verifier may (subject to the provisions of this Act, to any regulations under section 15 below and to any conditions included in his approval)–

(a) test any equipment to which this section applies by means of other equipment which has already been tested and which the verifier considers suitable for the purpose,

(b) if the equipment being tested falls within the prescribed limits of error and by virtue of subsection (10) below is not required to be stamped as mentioned in paragraph (c) below, make a statement in writing to the effect that it is passed fit for use for trade, and

(c) except as otherwise expressly provided for by or under this Act, stamp it with the prescribed stamp.”

(4) After subsection (6) of that section there shall be inserted the following subsection–

S-6A

“6A In this Act approved verifier, in relation to weighing or measuring equipment of any class or description, means a person who is for the time being approved under section 11A below in relation to the testing, passing and stamping of weighing or measuring equipment of that class or description.”

(5) In subsection (7) of that section, after the words “subsection (4)(c)” there shall be inserted the words “or (4A)(c)”.

(6) In subsection (10) of that section, for the words “(4) and (7)” there shall be substituted the words “(4), (4A) and (7)”.

(7) After that section there shall be inserted the following section–

S-11A

Approval of persons to verify equipment manufactured etc by them.

11A.—(1) Subsection (2) below applies where, as regards a person who carries on business (whether in Great Britain or elsewhere) as a manufacturer, installer or repairer of equipment to which section 11 above applies, the Secretary of State–

(a)

(a) is satisfied that the person would, if approved under this section, satisfy the requirements set out in Part II of Schedule 3A to this Act, and

(b)

(b) considers the person a fit and proper person to be so approved.

(2) The Secretary of State may approve the person for the purpose of–

(a)

(a) testing any equipment to which section 11 above applies and which is manufactured, installed or repaired by him,

(b)

(b) passing any such equipment as fit for use for trade, and

(c)

(c) stamping any such equipment with the prescribed stamp.

(3) Before granting an approval under this section, the Secretary of State may carry out such audits and inspections of the person’s systems and procedures as he considers necessary to establish that the conditions of the approval would be observed.

(4) Schedule 3A to this Act (which relates to approvals under this section and matters connected with such approvals) shall have effect.

(5) In that Schedule “approval” means an approval under this section and “the verifier”, in relation to such an approval, shall be construed accordingly.”

(8) In section 14(1) of the 1985 Act (general specifications of equipment), after the words “an inspector” there shall be inserted the words “or approved verifier”.

(9) In section 16(1)(a) of that Act (offences in connection with stamping of equipment), after the word “inspector”, in both places where it occurs, there shall be inserted the words “or approved verifier”.

(10) In subsection (4) of section 74 of that Act (performance by inspectors of additional functions), the words from “Without prejudice” to “this Act” shall be omitted.

(11) After that subsection there shall be inserted the following subsections–

S-5

“5 A local weights and measures authority may also make arrangements whereby an inspector may, at the request of the Secretary of State and subject to payment by him of such fee, if any, as the authority may think fit, provide advice and assistance to the Secretary of State in connection with the carrying out by him of any audit or inspection under section 11A(3) above or paragraph 7(3) of Schedule 3A to this Act.

S-6

6 Subsections (4) and (5) above are without prejudice to the functions of local weights and measures authorities or inspectors under any other provision of this Act.”

(12) For subsection (2) of section 75 of that Act (offences in connection with office of inspector) there shall be substituted the following subsections–

S-1A

“1A Any approved verifier who–

(a) stamps any weighing or measuring equipment in contravention of any provision of this Act or of any instrument made under this Act or without duly testing it, or

(b) commits any breach of any duty imposed on him by or under this Act,

shall be guilty of an offence.

S-2

2 If any person who is not an inspector, or is not an approved verifier, acts or purports to act as such, he shall be guilty of an offence.

S-3

3 Section 34 of this Act shall apply in relation to proceedings for an offence under subsection (1A)(b) above as it applies in relation to proceedings for an offence under Part IV of this Act.”

(13) In section 79(1) of that Act (general powers of inspection and entry), at the end of paragraph (a) there shall be inserted “or which has been, or which he has reasonable cause to believe to have been, passed by an approved verifier, or by a person purporting to act as such a verifier, as fit for such use”.

(14) In section 94(1) of that Act (general interpretation), immediately before the definition of “capacity measurement” there shall be inserted the following definition–

““approved verifier” has the meaning given by section 11(6A) above;”.

(15) After Schedule 3 to that Act there shall be inserted, as Schedule 3A, the provisions set out in the Schedule to this Order.

S-3 Testing by official EEA testers

Testing by official EEA testers

3. After section 11A of the 1985 Act there shall be inserted the following section–

S-11B

Testing by official EEA testers.

11B.—(1) This section applies where–

(a)

(a) any equipment which has been tested by an official EEA tester is at any time submitted to an inspector under section 11(4) above,

(b)

(b) the test report of the official EEA tester is submitted to the inspector at that time, and

(c)

(c) that report states which tests have been applied to the equipment and sets out the results of those tests.

(2) Section 11 above shall have effect as if–

(a)

(a) paragraph (a) of subsection (4) required the inspector not to test the equipment in the manner mentioned in that paragraph,

(b)

(b) paragraphs (b) and (c) of that subsection required him to rely, for the purposes of those paragraphs, on the test report of the official EEA tester, and

(c)

(c) the reference in subsection (5) to any test carried out under subsection (4) were a reference to anything done under subsection (4).

(3) In this section ‘official EEA tester’, in relation to the testing of equipment of any description, means a person who, at the time when the tests were applied–

(a)

(a) had responsibility in an EEA State for the metrological control of equipment of that description, or

(b)

(b) was accredited in an EEA State as a person operating a laboratory, in conformity with the criteria set out in the applicable European Standard, for the purpose of testing...

To continue reading

Request your trial

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT